Picking a tonneau cover for GMC MultiPro tailgate beds requires extra attention to rear latch clearance and exact bed length. Because the MultiPro tailgate uses an inner gate and step assembly, choosing incompatible side rails or a poorly aligned rear seal can interfere with tailgate operation.
You also have to match your exact box measurement, as these covers split between the 5.8-foot (69.6-inch to 69.9-inch) short bed and the 6.7-foot (79.4-inch) standard bed.
This guide compares 10 hard folding, soft tri-fold, quad-fold, soft roll-up, hybrid, and retractable covers listed for 2007 to 2027 trucks.
We built this list by comparing retailer listings, manufacturer specs, and verified buyer feedback. Confirm current price and exact vehicle fitment on the retailer page before ordering.
How to Choose a Tonneau Cover for GMC MultiPro Tailgate Beds
Choosing a tonneau cover for GMC MultiPro tailgate beds requires matching your exact truck box length, checking inner-gate seal clearance, and balancing cargo security against bed access. Review these five factors before ordering so your six-function tailgate drops and folds without interference:
Fitment by bed length and model year: Measure your truck box from the bulkhead to the inside of the tailgate. The covers in this guide split between the 5.8-foot (69.6-inch to 69.9-inch) short bed and the 6.7-foot (79.4-inch) standard bed across 2007 to 2027 model years.
MultiPro tailgate and inner-gate clearance: The GMC MultiPro tailgate uses a folding inner gate and integrated load stop. Look for side rails and rear perimeter seals specifically listed for MultiPro compatibility so the tailgate latches cleanly without catching the cover.
Opening style and bed access: Soft roll-up, soft tri-fold, quad-fold, hybrid, hard folding, and retractable covers open differently. Hybrid covers let you fold the front panel or roll the full tarp back, while upright hard folding covers and retractable canisters offer different trade-offs for full-bed hauling.
Material and cargo security: Soft vinyl covers shield cargo from rain and road dust at a lower price point, while rigid aluminum panels and retractable slats add stronger protection against knife cuts and theft.
Weather sealing and installation: Most covers clamp directly onto factory bed rails without drilling. Flush-mount hard folding and retractable covers often use perimeter rubber seals and drain tubes to channel rainwater out of the bed.
Calffree Hard Tri-Fold Truck Bed Tonneau Cover GMC MultiPro Tailgate 6.7ft Bed (79.4″) | Fits 2007-2026
Calffree · Fits 2007–2026 GMC MultiPro Tailgate 6.7ft Bed (79.4″) · Rigid hard tri-fold panels
Quick Answer
The Calffree Hard Tri-Fold Cover fits 2007 to 2026 GMC 6.7-foot (79.4-inch) standard truck beds equipped with the MultiPro tailgate. It gives you rigid, three-panel security at an entry-level hard-cover price.
Designed with a clamp-on tri-fold frame, this cover mounts to factory bed rails without drilling. The rigid panels fold back toward the cab in three sections to let you load tall gear, while perimeter weather strips help block rain and road dust.
Pros
- Hard folding panels offer stronger theft and weather protection than a soft vinyl cover
- Sized specifically for the 6.7-foot (79.4-inch) standard bed with MultiPro tailgate compatibility
- No-drill clamp installation mounts directly onto the truck bed rails
- Costs significantly less than premium flush-mount aluminum folding covers
Cons
- Entry-level hard tri-fold design stows in the two-thirds open position unless removed completely
- Over-the-rail panel profile sits higher than flush-mount covers like the BAKFlip MX4
- Heavier and bulkier for one person to lift off the truck bed than a soft tri-fold cover
Skip it if: you have the 5.8-foot (69.6-inch) short bed (see Rank #4 for the short-bed Calffree version) or want a flush-mount cover that props vertically against the cab.
SYNTHACY Soft Tri-Fold Truck Bed Tonneau Cover GMC MultiPro Tailgate 5.8ft Bed | Fits 2019-2026
SYNTHACY · Fits 2019–2026 GMC MultiPro Tailgate 5.8ft Bed · Tear-resistant vinyl
Quick Answer
The SYNTHACY Soft Tri-Fold Cover (ASIN B0F9PCBLFG) fits 2019 to 2026 GMC 5.8-foot short beds equipped with the MultiPro tailgate. It arrives pre-assembled for a tool-free, clamp-on install at an affordable soft-cover price.
Built with a dual-coated vinyl tarp stretched over a lightweight aluminum tri-fold frame, this cover folds back toward the cab in three sections when you need to load taller items. Front and rear clamps secure directly to the factory bed rails without drilling, and integrated buckle straps hold the folded cover in place while driving.
Pros
- Pre-assembled tri-fold frame clamps onto 2019–2026 GMC 5.8-foot bed rails without drilling
- Sized to clear the GMC MultiPro and Chevy Multi-Flex tailgate without blocking inner-gate operation
- Lightweight folding frame is easy for one person to unclamp and remove for full bed access
- Budget-friendly price point compared to hard folding or retractable covers
Cons
- Soft vinyl tarp does not protect against knife cuts like a hard folding aluminum cover
- Folds back to expose two-thirds of the bed unless you unclamp and remove the entire cover
- Sits on top of the bed rails rather than mounting flush with the bed caps
Skip it if: you have the 6.7-foot standard bed (see Rank #7 for the MOSTPLUS 6.7-foot soft quad-fold) or need rigid panels for theft protection.
TruXedo Deuce Hybrid Truck Bed Cover GMC MultiPro Tailgate 5′ 10″ Bed (69.9″) | Fits 2019-2027
TruXedo · Fits 2019–2027 GMC MultiPro Tailgate 5′ 10″ Bed (69.9″) · Leather-grain vinyl
Quick Answer
The TruXedo Deuce (Part # 773001) fits 2019 to 2027 GMC 5-foot-10-inch (69.9-inch) short beds equipped with the MultiPro tailgate. It combines a full soft roll-up cover with a hinged front panel that flips open from the cab side for fast access to front-of-bed gear.
Mounting inside the bed rails to sit just 3/4 inch above the truck box, this dual-action cover lets you roll the leather-grain vinyl tarp from the tailgate or pull a hidden front latch to fold the cab section back. Automatic spring tensioners keep the tarp tight across seasonal temperature changes without manual adjustment.
Pros
- Dual-action design rolls completely open from the rear or folds back from the cab panel
- Inside-rail mounting sits 3/4 inch above the truck box and clears the GMC MultiPro tailgate
- Automatic tension control keeps the tear-resistant vinyl tarp taut in hot and cold weather
- No-drill clamps install cleanly with basic hand tools
Cons
- Costs more than standard single-direction soft roll-up covers like the TruXedo TruXport
- Soft vinyl top does not protect against knife cuts like a hard folding aluminum cover
- Hook-and-loop side strips require occasional cleaning to hold firmly in dusty conditions
Skip it if: you rarely reach for gear near the cab bulkhead and want a lower-priced soft roll-up (see Rank #8 for the TruXedo TruXport), or need rigid aluminum panels for theft security.
Calffree Hard Tri-Fold Truck Bed Tonneau Cover GMC MultiPro Tailgate 5.8ft Bed (69.6″) | Fits 2007-2026
Calffree · Fits 2007–2026 GMC MultiPro Tailgate 5.8ft Bed (69.6″) · Rigid hard tri-fold panels
Quick Answer
The Calffree Hard Tri-Fold Cover (ASIN B0F9XKFBBV) fits 2007 to 2026 GMC 5.8-foot (69.6-inch) short truck beds equipped with the MultiPro tailgate. It offers solid three-panel hard protection at an economical price point.
Engineered specifically for short-bed trucks with multi-function tailgates, this cover clamps directly onto factory bed rails without drilling. The rigid panels fold back toward the cab in sections to accommodate medium-sized cargo, while perimeter weather seals help block out rain and road debris.
Pros
- Designed to fit 5.8-foot short beds with MultiPro tailgate compatibility
- Hard folding panels provide superior theft and weather defense compared to soft covers
- Clamp-on mounting rails install quickly with basic hand tools and zero drilling
- Budget-friendly price compared to flush-mount aluminum folding covers
Cons
- Stows in the two-thirds open position unless you completely unclamp and remove it
- Over-the-rail profile sits slightly higher than flush-mount aluminum options
- Bulkier for a single person to lift off compared to soft vinyl tri-fold alternatives
Skip it if: you have the 6.7-foot standard bed (see Rank #1 for the standard-bed Calffree version) or want a cover that props vertically against the cab.
RealTruck BAK BAKFlip MX4 Hard Folding Tonneau Cover GMC MultiPro Tailgate 5′ 10″ Bed (69.9″) | Fits 2019-2026
RealTruck BAK · Fits 2019–2026 GMC MultiPro Tailgate 5′ 10″ Bed (69.9″) · Heavy-duty aluminum panels
Quick Answer
The BAKFlip MX4 (Part # 448130) fits 2019 to 2026 GMC 5-foot-10-inch short beds with the MultiPro tailgate. It delivers premium matte-finish aluminum security that allows full access to the truck bed and tailgate without obstruction.
Constructed with heavy-duty aluminum panels coated in a scratch-resistant matte black finish, this premium cover sits flush inside the bed rails. It features integrated prop rods to secure the folded panels vertically against the cab, giving you full use of the bed and complete clearance for the multi-function tailgate.
Pros
- Flush-mount design sits level with bed caps for a sleek, low-profile appearance
- Matte-finish aluminum panels resist UV fading, scratches, and denting
- Prop rods allow the cover to lock upright against the cab for full bed utilization
- Compatible with the GMC MultiPro tailgate inner-gate operation
Cons
- Higher price tag compared to soft covers and budget hard tri-folds
- Folding all the way up blocks your rear window visibility
- Drain tubes must be routed correctly through the bed to prevent water pooling
Skip it if: you want a budget-friendly cover (see Rank #2 for the SYNTHACY soft tri-fold) or prefer a roll-up style that leaves your rear window entirely clear.
RealTruck Retrax RetraxPRO MX Retractable Tonneau Cover GMC MultiPro Tailgate 5′ 10″ Bed (69.9″) | Fits 2019-2026
RealTruck Retrax · Fits 2019–2026 GMC MultiPro Tailgate 5′ 10″ Bed (69.9″) · Matte aluminum retractable slats
Quick Answer
The RealTruck Retrax RetraxPRO MX fits 2019 to 2026 GMC 5-foot 10-inch (69.9-inch) short beds with the MultiPro tailgate (excluding CarbonPro beds). It delivers commercial-grade, double-walled aluminum security with a 500-pound distributed weight capacity and smooth, key-lockable retraction.
Built from industrial-strength aluminum slats finished in a scratch-resistant matte black powder coat, this cover glides along sealed ball-bearing rollers into a compact spiral canister without needing pull straps or springs. Its electromagnetic brake lets you key-lock the cover in any position along the rails to secure oversized cargo while preserving full MultiPro tailgate operation.
Pros
- Industrial-strength aluminum slats support up to 500 lbs of evenly distributed weight on top
- Key-lockable latch secures the cover at any stopping point along the bed rails
- Sealed ball-bearing roller system glides open with one hand without straps, Velcro, or springs
- Fully compatible with the GMC MultiPro tailgate and backed by a limited lifetime warranty
Cons
- Front spiral canister takes up roughly 11 to 13 inches of forward bulkhead space
- Costs significantly more than hard tri-fold and soft roll-up alternatives
- Does not fit GMC Sierra models equipped with the CarbonPro composite bed
Skip it if: you have the CarbonPro composite bed, need 100% of your front bulkhead depth for hauling ATVs or drywall, or want a cover under $1,000.
MOSTPLUS Quad-Fold Soft Truck Tonneau Cover GMC MultiPro Tailgate 6.7ft Bed (79.4″) | Fits 2019-2026
MOSTPLUS · Fits 2019–2026 GMC MultiPro Tailgate 6.7ft Bed (79.4″) · Four-panel tear-resistant vinyl
Quick Answer
The MOSTPLUS Quad-Fold Soft Tonneau Cover fits 2019 to 2026 GMC 6.7-foot (79.4-inch) standard beds and folds into four compact sections rather than three, giving you up to three-quarters open bed clearance without unbolting the frame.
Constructed from double-sided, tear-resistant marine-grade vinyl stretched across a powder-coated aluminum frame with four horizontal crossbars, this top-mount cover installs in minutes with no-drill clamps. Because it folds into fourths, the stowed stack leaves more room near the rear of the bed for loading tall boxes or appliances while keeping weather and road spray off your cargo when closed.
Pros
- Four-panel folding design opens up 75% of the 6.7-foot bed—more clearance than standard tri-fold covers
- Double-sided tear-resistant vinyl reinforced by four powder-coated aluminum crossbars
- Pre-assembled frame clamps directly to factory bed rails with no drilling or cutting required
- Lightweight enough for one person to fold back, buckle down, or remove completely in minutes
Cons
- Soft vinyl tarp can be cut with a blade and offers less theft security than hard folding panels
- Verify rear clamp clearance on MultiPro/Multi-Flex tailgates, as the manufacturer notes standard tailgate fitment on select sub-models
- Sits on top of the bed rails rather than flush with the bedside caps
Skip it if: you have the 5.8-foot (69.9-inch) short bed, need hard-panel lockable security for expensive tools, or frequently fold the inner MultiPro step up against the closed cover.
TruXedo TruXport Soft Roll-Up Tonneau Cover GMC MultiPro Tailgate 5′ 10″ Bed (69.9″) | Fits 2019-2027
TruXedo · Fits 2019–2027 GMC MultiPro Tailgate 5′ 10″ Bed (69.9″) · Leather-grain soft roll-up vinyl
Quick Answer
The TruXedo TruXport Soft Roll-Up Cover fits 2019 to 2027 GMC 5-foot 10-inch (69.9-inch) short beds with the MultiPro tailgate (excluding CarbonPro beds). It pairs a leather-grain vinyl tarp with dual-paddle tailgate latches and built-in tension adjusters for reliable everyday weather protection.
Sitting 1.5 inches above the truck bed rails, the TruXport uses straight cross-tubes that roll up directly inside the tarp to help shed heavy rain and snow loads when closed. Dual latches at the rear let you release the cover from either side of the MultiPro tailgate and roll it cleanly up to the cab bulkhead for full bed access without removing any hardware.
- Rolls tightly against the cab with integrated safety straps to give you nearly 100% open bed access
- Pre-set tension control system adjusts easily by hand to keep the vinyl tight across seasonal temperature swings
- Dual-paddle latches at the rear rails work smoothly with GMC MultiPro tailgate configurations
- Backed by a 5-year manufacturer warranty and made in the USA with global materials
Cons
- Top-mount profile sits 1.5 inches above the bed rails rather than flush like the TruXedo Pro X15
- Soft leather-grain vinyl cannot prevent knife entry like rigid aluminum or FRP folding panels
- Incompatible with GMC Sierra models equipped with the CarbonPro composite bed
Skip it if: you have the CarbonPro composite bed, want an ultra-flush matte fabric finish, or need lockable hard-panel security for high-value tools.
RealTruck UnderCover Ultra Flex Hard Folding Tonneau Cover GMC MultiPro Tailgate 6′ 7″ Bed (79.4″) | Fits 2019-2025
RealTruck UnderCover · Fits 2019–2025 GMC MultiPro Tailgate 6′ 7″ Bed (79.4″) · Matte black aluminum panels w/ carpeted underside
Quick Answer
The RealTruck UnderCover Ultra Flex (Part UX12023) fits 2019 to 2025 GMC 6-foot 7-inch (79.4-inch) standard beds equipped with the MultiPro tailgate (excluding CarbonPro beds). It combines flush-mount matte black aluminum panels with a finished carpet-like underside and dual-action tailgate seals.
Built from high-density aircraft-grade aluminum over a dense polymer core, the Ultra Flex sits nearly flush inside the bed rails for a sleek, factory-style stance. Automatic slam latches lock each panel into the side L-rails as you lower it, while integrated prop rods let you fold the cover vertically against the back of the cab for 100% open bed access without removing the cover.
Pros
- Dual-action tailgate seal lets you open and close the GMC MultiPro tailgate whether the cover is up or down
- Folds vertically against the cab on integrated prop rods to give you 100% open bed access for tall cargo
- Matte black powder-coated aluminum top panels paired with a carpeted under-panel finish for an OEM look
- Made in the USA and backed by a 5-year manufacturer warranty
Cons
- Requires routing two front L-rail drain tubes into the bed floor knockouts to channel water away
- Does not fit GMC Sierra models equipped with the CarbonPro composite truck bed
- Premium price tag sits well above entry-level top-mount hard tri-fold covers
Skip it if: you have the 5-foot 10-inch (69.9-inch) short bed, drive a Sierra with the CarbonPro composite bed, or want a budget hard tri-fold under $600.
Toptiny Hard Folding Truck Bed Tonneau Cover GMC MultiPro Tailgate 6′ 7″ Bed (79.4″) | Fits 2007-2026
Toptiny · Fits 2007–2026 GMC MultiPro Tailgate 6′ 7″ Bed (79.4″) · Heavy-duty aluminum hard tri-fold
Quick Answer
The Toptiny Hard Folding Tonneau Cover (Part THTF030) fits 2007 to 2026 GMC 6-foot 7-inch (79.4-inch) standard beds equipped with the MultiPro tailgate (excluding CarbonPro beds). It delivers rigid, Honeycomb-reinforced aluminum panel security at a mid-range price without requiring rail drilling.
Constructed with powder-coated aluminum panels over an internal honeycomb core, this three-panel cover clamps directly to the factory bed rails and seals out rain and snow with perimeter rubber weatherstripping. Quick-release rear latches let you fold the panels forward toward the cab and buckle them down for hauling large cargo while maintaining full MultiPro tailgate operation.
Pros
- Rigid powder-coated aluminum panels resist dents, UV fading, and knife entry better than soft vinyl covers
- Engineered to clear GMC MultiPro tailgate operation on 6-foot 7-inch (79.4-inch) standard beds
- Pre-assembled tri-fold frame installs in minutes with hand-tightened clamps and no drilling
- Costs less than half the price of premium flush-mount folding covers like the UnderCover Ultra Flex
Cons
- Top-mount tri-fold design leaves the front panel fixed over the forward third of the bed unless unbolted
- Does not fit GMC Sierra models equipped with the CarbonPro composite bed
- Parent Amazon listing combines multiple year sub-models (2007–2018 and 2019–2026), so verify your exact cab/bed year selection before checkout
Skip it if: you have the 5-foot 10-inch (69.9-inch) short bed, drive a CarbonPro composite-bed Sierra, or need a cover that props vertically against the back glass for 100% bed access.
Frequently Asked Questions About Tonneau Covers for the GMC MultiPro Tailgate
Do you need a special tonneau cover for the GMC MultiPro tailgate?
Most modern tonneau covers fit the GMC MultiPro tailgate without requiring a MultiPro-specific part number, provided the cover is designed for the 2019–2026 GMC Sierra body style. However, covers with thick rear perimeter rails, overhanging slam latches, or low-hanging rear clamps can interfere with the inner folding gate and primary load stop. Choosing a cover with a dual-action tailgate seal (like the RealTruck UnderCover Ultra Flex or RetraxPRO MX) or top-mount compression seals ensures smooth operation of all six MultiPro positions.
Can you open the MultiPro inner gate while the tonneau cover is closed?
Yes, on flush-mount covers equipped with a dual-action rear tailgate seal and on most top-mount soft covers, you can drop both the main tailgate and the inner MultiPro gate without lifting the cover. On certain budget hard tri-fold and quad-fold covers where the rear rubber fin tucks tightly behind the top lip of the inner gate, you may need to unlatch and crack the rear panel open slightly before closing the inner gate to avoid pinching the weatherstrip.
Will a MultiPro tonneau cover also fit a GMC Sierra with the CarbonPro bed?
No. Standard GMC Sierra steel-bed tonneau covers—even those rated for the MultiPro tailgate—will not fit trucks equipped with the CarbonPro composite bed unless specifically stated. The CarbonPro bed features uniquely contoured carbon-fiber composite side rails and different front bulkhead dimensions that require dedicated CarbonPro mounting brackets and rail adapters.
How do I know if my GMC Sierra has the 5′ 10″ short bed or 6′ 7″ standard bed?
Measure the inside of your truck bed along the center floor from the front bulkhead wall to the inside face of the closed MultiPro tailgate:
- 5′ 10″ Short Bed (5.8 ft): Measures approximately 69.9 inches inside (available on 1500 Crew Cab models).
- 6′ 7″ Standard Bed (6.7 ft): Measures approximately 79.4 inches inside (available on 1500 Crew Cab, Double Cab, and 2500HD/3500HD models).
Can you use the MultiPro step and grab handle with a tonneau cover installed?
You can fold down the full-width MultiPro step while any tonneau cover is closed. However, if you want to flip up the cab-side bed grab handle to climb into the truck bed, you will need to fold, roll, or retract at least the rear section of your tonneau cover first so you have clear standing room and access to the folded-down handle on the driver’s side rail.
Does the GMC MultiPro tailgate leak more water with a tonneau cover?
Because the MultiPro tailgate has an extra horizontal seam between the main tailgate and the inner flip-out gate, high-pressure car washes and driving rain can push small amounts of water through the tailgate gaps even when the top tonneau seal is tight. Adding an aftermarket tailgate gap seal kit around the lower jambs—while leaving the inner MultiPro hinge clear—dramatically reduces dust and water intrusion.
Which Tonneau Cover Should You Pick for Your GMC MultiPro Tailgate?
Picking the right tonneau cover for a GMC Sierra with the MultiPro tailgate comes down to two things: matching your exact bed length-either the 5′ 10″ (69.9″) short bed or the 6′ 7″ (79.4″) standard bed and choosing a rear seal profile that clears the six-position inner gate without binding.
- Best Budget Hard Tri-Fold (6.7 ft Bed): Go with the Calffree Hard Tri-Fold or Toptiny Hard Folding Cover if you want rigid, lockable panel security under $500 with simple no-drill clamps.
- Best Flush-Mount Full Bed Access (6.7 ft Bed): Choose the RealTruck UnderCover Ultra Flex for a factory-flush matte aluminum finish, a dual-action tailgate seal that lets you drop the MultiPro gate with the cover closed, and 100% upright cab-side folding.
- Best Heavy-Duty Retractable (5′ 10″ Short Bed): Step up to the RealTruck RetraxPRO MX if you haul heavy gear and want commercial-grade aluminum slats that support 500 pounds on top and key-lock anywhere along the bed rails.
- Best Value Soft Covers: Pick the TruXedo TruXport Soft Roll-Up (for 5′ 10″ short beds) or the MOSTPLUS Quad-Fold (for 6.7 ft standard beds) if you want fast, lightweight weather protection without spending hard-cover money.
Before clicking checkout, run a tape measure from your front bulkhead to the inside of your closed MultiPro tailgate one last time, and confirm your Sierra has the standard steel bed rather than the CarbonPro composite box. Once installed, you will keep rain, snow, and prying eyes off your cargo while keeping every position of your GMC MultiPro tailgate ready for work.
